E.MIX ALC Render

Pre-mixed high quality cement-based render specially developed for application on external ALC wall surfaces.

Eliminate on-site mixing, wastage and provides contaminant free render by reducing efflorescence, bleeding etc.

For improved Adhesion Strength, Cohesive Strength, Flexural Strength, Abrasion Resistant, Frost Resistant and Durability,

Reduced Water Permeability, Reduced Drying Shrinkage, Reduced Surface Dusting, Minimized Efflorescence and Improved Workability
Read more
Read less


  • Remove loose particles, grease and traces of foreign materials, on a dry absorbent surface, surface is moistened if necessary
  • mixing time of 3-7 minutes depending on the type of mixing equipment.
  • Application can be done by hand and machine.
  • Final surface can either be smoothened or sponge-finished..
  • In hot and dry condition the plaster should be cured with water spray during the first 2

Key Facts

  • Single component: fixed mixing proportion, ensure the quality of work
  • Shrinkage compensated: reduce the chance of shrinkage cracks
  • Suitable to receive paint with E.MIX SKIM COAT series products
  • Suitable to for tiling with receiving WEBER TILE ADHESIVE and TILE GROUT series products


Pot life : Approx. 1 hour
Coat thickness : 5 -15mm/coat
Coverage : Approx. 1.6kg/m²/mm thick
Water ration : Approx. 8 litres/40kg bag
Recommended to wear NIOSH approved or equivalent face mash when mixing the material


E.MIX ALC Render_0