weberset CTF grey

Ceramic tile adhesive for interior wall and floor
Read more
Read less
Ceramic tile adhesive for interior wall and floor


  • Substrate must be dry, sound, flat / true & free of contaminants.
  • Ceramic Tiles are to be fix dry. Do not soak in water.
  • Mix weberset CTF grey with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
  • Spread adhesive to the substrate at bed thickness of 3– 6 mm(may vary depending on tile size & thickness) with suitable notched trowel.
  • Spread no more than 1 m2 at a time to avoid Skin-Over. 
  • Promptly fix tiles onto adhesive bed, followed by slight twisting action to ensure good contact ie. Solid Bed Fixing.
  • Touch adhesive bed periodically to check for Skin-Over. Where adhesive bed is no longer tacky / sticky, Skin-Over had occurred. Re-Trowel adhesive bed.
  • Allocate joints of approx. 2 – 3 mm wide between tiles.
  • Remove surplus adhesive from tile surface & joints before it hardens.
  • Set for 24 hours; before grouting commences.

Key Facts

  • High quality C1 tile adhesive
  • Very good strength (x>1.0 Nmm2)
  • Best for porous ceramic tiles


  • Bed thickness : 3 - 6mm
  • Application temperature above 5°C-50°C
  • Open time : Approx. 15 - 20 Minute
  • Setting time is 24 hours
  • Adjustability Time : 10 minutes – May vary depending on porosity of substrate.
  • Mix Proportion : 1 pbw water to 3 pbw adhesive (6 - 8 ltrs Water or Latex Admixture to 25 kg weberset CTF grey)
  • Shelf life : 6 month


weberset CTF grey_0320_R03 - EN