weberset super star 118

C1 tile adhesive suitable for both internal and external applications.

Read less

C1 tile adhesive suitable for both internal and external applications.

Description

Ensure the substrate is dry, sound, flat/true, and free of contaminants.
Fix ceramic tiles dry; do not soak in water.
Mix weberset super star with water (or latex admixture) according to the recommended ratio. Mechanical mixing is recommended.
Spread adhesive onto the substrate at a bed thickness of 3 - 6 mm (thickness may vary depending on tile size and thickness) using a suitable notched trowel.
Apply adhesive over no more than 1 m² at a time to prevent skin-over.
Promptly place tiles onto the adhesive bed, twisting slightly to ensure good contact (solid bed fixing).
Periodically touch the adhesive bed to check for skin-over. If the adhesive bed is no longer tacky/sticky, re-trowel the adhesive.
Maintain joints approximately 2-3 mm wide between tiles.
Remove excess adhesive from the tile surface and joints before it hardens.
Allow to set for 24 hours before beginning grouting.
Do not use adhesive in temperatures lower than 5°C or in damp conditions.

Bed thickness: 3 - 6 mm
Application temperature: Above 5°C - 40°C
Open time: Approximately 15 - 20 minutes
Setting time: 24 hours
Adjustability time: 10 minutes (may vary depending on substrate porosity)
Mix proportion: 6 - 6.5 liters of water or latex admixture to 20 kg of weberset super star
or 7.5 - 8.125 litres of water of latex admixture to 25 kg of weberset super star
Shelf life: 6 months